Paul Evans Stunning 4 Door Credenza in Walnut Burl 1973 - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

4 Door credenza with bi-fold doors in tessellated walnut burl with adjustable shelves in interior by Paul Evans for Directional Furniture, American 1973. This piece has felt lining on the interior of the right door and on the shelf, perfect for dishes or valuables. These Paul Evans pieces are all unique and works of art.

Reference:
Paul Evans Design & Sculptor by Jeffrey Head, published by Schiffer in 2012, various pieces are shown in tessellated walnut burl, pages 117-123.

W: 72 inches
D: 21 inches
H: 32.5 inches

Condition: Excellent - this piece has been restored.

SOLD

ref: credenza113

Paul Evans PE-11 Hand-Welded Zig Zag Coffee Table 1969 (Signed And Dated) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Artisan welded coffee table with hand-painted polychrome enamels, zig zag design with glass top, by Paul Evans, American 1969 (signed and dated “PE69” on side). The exuberant form and the beautiful colors make this table a real stand out.
Dimensions are given as shown with the original glass top. This table can accommodate any size glass top. We will fabricate a new glass top for the buyer so you can specify.

Reference:
Paul Evans, Crossing Boundaries and Crafting Modernism by Constance Kimmerly (Ed.) published by Arnoldsche Art Publishers in 2014, on page 26 is a photo of this coffee table from the original catalog published in 1968.

Dimensions of glass as shown
W: 60 inches
D: 24 inches
H: 17 inches overall (glass top 1 inch)

Dimensions of base
W 37 inches
D: 22 inches
H: 16 inches

Condition: Excellent

SOLD

ref: coffeetable525

Paul Evans Rare and Important Sculptured Metal Dining Table 1970 (signed and dated) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Rare Sculptured Metal Dining Table in bronzed resin with glass top by Paul Evans for Directional Furniture, American 1970 (signed "PE 70”). This series is very rare and this particular table exemplifies the art that is Paul Evans. This table has not been shown in the market before. This piece was created from a mixture of epoxy resin and sand applied to a metal and plywood base and sculpted into various swirls, drips and other patterns. Once hardened, the piece was sandblasted, sprayed with an atomized bronze finish, varnished, blown with a torch to provide a smoky look, polished, and then varnished again. The resulting work has a metallic sheen but is lightweight compared with something made of cast bronze.

Provenance:
Private Collection, New Jersey, since purchase from the artist’s studio.

Reference:
Paul Evans, Crossing Boundaries and Crafting Modernism by Constance Kimmerle, published by Arnoldsche Art Publishers in 2014, a welded “Wavy Front” Cabinet is shown on pages 164-165. Photos showcase this design though the materials are different.

Dimensions

Base:
W: 62 inches
D: 32 inches
H: 28 inches

Glass Top:
W: 108 inches
D: 48 inches
H: 1 inch

We can help you customize the glass table top if desired.

Condition: Excellent

SOLD

ref: diningtable174

Paul Evans Rare Sculptural Dining/Game/Center Table in Welded Steel 1960s (Signed) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Rare and stunning dining/game/center table model PE-46 in welded and patinated steel with polychrome enamels and gilding by Paul Evans Studio for Directional Furniture, American 1960's (signed “Paul Evans” on base). This table has beautiful coloration and is truly a work of art. It can accommodate a larger glass top if needed.

Reference:
Paul Evans Designer & Sculptor by Jeffery Head published by Schiffer in 2012, the “Lamp Table” variation of this design is shown on page 74.

Diam glass top: 48 inches
Diam base: 22 inches
H: 29 inches

Condition: Excellent - new glass top fabricated by Lobel Modern

SOLD

ref: diningtable196

Paul Evans Iconic "Faceted Dining Table" in Walnut Burl and Polished Brass 1970

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Iconic "Faceted Dining Table" in walnut burl and polished brass with thick glass top by Paul Evans for Directional Furniture, ca 1970. This is one of Evans’ most sought after designs, and this piece is a true work of art. This piece can accommodate any size glass top.

Reference:
Paul Evans, Designer and Sculptor by Jeffrey Head, published by Schiffer Publishing in 2012, this model is shown on page 116 with the reference, “Faceted Dining Table”.

Dimensions for Base:
W: 53 inches
D: 20 inches
H: 32 inches

Dimensions for Glass Top as shown:
W: 84 inches
D: 48 inches
H: 0.5 inches

Condition:  Very Good - some small dents and scratches consistent with age.

$35,000

Ref: diningtable195

Paul Evans Pair of Upholstered Cantilevered Side Chairs 1977 - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Pair of side chairs, cantilevered with polished chrome bases and upholstered seats and backs, by Paul Evans for Directional Furniture, Collection 77, American, 1977. Newly reupholstered with a sumptuous leather seat and beautifully textured fabric back. These chairs are extremely comfortable and are perfect as side chairs or game chairs. Bases have been cleaned and polished.

Each:
W: 22 inches
D: 23 inches
H: 34.5 inches
Seat H: 19 inches

Condition: Excellent - some small scratches consistent with age and very light use.

SOLD

ref: diningchairs155

Paul Evans Unique Bronze Resin Wall Mounted Console Table 1975 (Signed)

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Unique wall mounted console table in bronze resin by Paul Evans, American 1975 (signed "PE75" on side). This console was purchased by the original owner together with an Evans’ bronze resin and burl mirror from Paul Evans’ studio. They remained in her home (see photo) until purchased by Lobel Modern., The mirror is available in a separate listing.

Reference:
Paul Evans Design & Sculptor by Jeffrey Head, published by Schiffer in 2012, pages 86 through 92 shows various bronze resin pieces.

W: 60 inches
D: 13.5 inches
H: 7.5 inches

Condition: Excellent

$15,000

ref: consoletable154

Paul Evans Pair of Patchwork Cube Tables in Pewter, Copper and Bronze 1960s - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Pair of artisan Patchwork Cube occasional tables in pewter, copper and bronze with inset natural cleft slate tops by Paul Evans Studio for Directional Furniture, 1960's. These hand-crafted tables are stunning and in superb condition.

Reference:
Paul Evans Designer & Sculptor by Jeffrey Head published by Schiffer in 2012, an example of this model table is shown on page 67 with the description, “Patchwork Occasional Table, c. 1970. Bronze, copper, and pewter with natural cleft slate top…”

Each:
W: 13 inches
D: 13 inches
H: 18.5 inches

SOLD

Condition: Excellent - slate has been professionally cleaned.

Ref: occasionaltables18

Paul Evans Impressive Etagere/Writing Desk in Walnut Burl with Glass Shelves 1973 (Signed) - ON HOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Large and impressive etagere in tessellated walnut burl with inset bronze glass shelves by Paul Evans for Directional Furniture, American 1973 (Retains original chrome Paul Evans signature plate which reads, “An Original Paul Evans”). This model etagere is quite rare. It is designed so that if you remove the lower glass shelf the wood table top can be used as a writing desk.

W: 48 inches
D: 17 inches
H: 84 inches

Condition: Excellent - Piece has been fully restored.

$15,000

ref: etagere18

Paul Evans Rare Mirror in Bronze Resin with Enameled Steel 1969 (Signed) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Rare and important wall mounted mirror in bronze resin with enameled steel elements by Paul Evans Studio for Directional Furniture, American 1969 (signed and dated “PE 69” on the side). We have the matching wall mounted cabinet available for purchase. This series is rare and this mirror is extremely rare. This piece was created from a mixture of epoxy resin and sand applied to a plywood base and sculpted into various swirls, drips and other patterns. Once hardened, the piece was sandblasted, sprayed with an atomized bronze finish, varnished, blown with a torch to provide a smoky look, polished, and then varnished again. The resulting work has a metallic sheen but is lightweight compared with something made of cast bronze. This is a work of art by one of the most important 20th century designers. (Photo shows mirror with matching wall cabinet, also available.)

W: 30 inches
D: 3.5 inches
H: 49 inches

Condition: Excellent

SOLD

ref: mirror276

Paul Evans Sculpted Bronze Coffee Table 1969 (Signed and Dated) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Rare “Skyline” design, sculpted bronze coffee table, model PE-131 with thick glass top by Paul Evans, American 1969 (signed “PE 69” on front).
An iconic Paul Evans work of art. Dimensions of the base are.

W: 49 inches
D: 30 inches
H: 15 inches

Documentation:
Paul Evans Designer & Sculptor by Jeffrey Head, published in 2012, pg. 91 illustrates variation

Dimensions:
W: 60 inches
D: 36 inches
H: 16 inches

Condition: Excellent

SOLD

ref: coffeetable519

Paul Evans Rare Low Console Table in Sculpted Bronze Resin 1970 (Signed) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Unique low console table in sculpted bronze resin with gray slate top by Paul Evans, American 1970 (signed and dated, “PE 70”, on front) . Bronze resin was created from a mixture of epoxy resin and sand applied to a plywood base and sculpted into various swirls, drips and other patterns. Once hardened, the piece was sandblasted, sprayed with an atomized bronze finish, varnished, blown with a torch to provide a smoky look, polished, and then varnished again. The resulting work has a metallic sheen but is lightweight compared with something made of cast bronze. Shown with Paul Evans rare sculpted bronze mirror with enameled steel elements (Lobel Modern ref: mirror276).

Provenance:
Private Collection Boston

W: 60 inches
D: 19 inches
H: 25 inches

Condition: Excellent

SOLD

ref: consoletable147

Paul Evans Wall Mounted "Patchwork" Console in Copper, Brass and Pewter 1970s - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

"Patchwork" wall mounted console in copper, brass and pewter with cleft slate top by Paul Evans for Directional Furniture, American 1970's. Artisan shingled copper is brazed with brass and pewter which makes each work unique. Matching mirror listed separately.

W: 60 inches
D:  13 inches
H:  5.5 inches

Condition: Excellent

SOLD

ref: consoletable108

Paul Evans Rare and Important Set of 6 Sculpted Bronze Dining Chairs 1960s - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Rare and important set of 6 Sculpted Bronze Dining Chairs with seats and back upholstered in white leather by Paul Evans Studio, American 1960’s. These stunning chairs represent the epitome of Evans’ artisanship.

Reference:
Paul Evans Designer & Sculptor by Jeffrey Head, published by Schiffer in 2012, there is a photo of this chair on page 89 with the description, “Sculpted bronze chair with orange velvet upholstery, 1965….”

Provenance:
Private Collection Boston

W : 29 inches
D:  25 inches
H:  30 inches
Seat H:  19 inches

Condition:  Excellent

SOLD

ref:  diningchairs225

Paul Evans Important Welded Steel and Slate Dining Table 1960s - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Incredibly rare and important patinated welded steel base dining table with gray slate slab top by Paul Evans Studio, American 1960's. This is the only dining table of this design which we have seen. The scale and artisanship are truly superb It is a masterwork of one of the most important 20th century artists.

Reference:
Paul Evans, Crossing Boundaries and Crafting Modernism by Constance Kimmerly (Ed.) published by Arnoldsche Art Publishers in 2014, on pages 172 and 173 there are sculptures made with the same patinated patchwork technique.

Provenance:
Private Collection Boston.

Diam: 72 inches
H: 30 inches

SOLD

Condition:  Excellent

Ref: diningtable191

Paul Evans Artisan PE-11 Coffee Table 1974 (Signed And Dated) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Hand-welded and colored sculptural coffee table, model PE-11 with thick glass top, by Paul Evans for Directional Furniture, American 1974 (signed and dated “P.E. 1974” on bottom corner). The coloration of this table is incredible and the gold points are beautiful.
This table can accommodate any size glass top. We can customize that for you.

Reference:
Paul Evans, Crossing Boundaries and Crafting Modernism by Constance Kimmerly (Ed.) published by Arnoldsche Art Publishers in 2014, on page 26 is a photo of this coffee table from the original catalog published in 1968.

Dimensions of glass as shown
W: 60 inches
D: 24 inches
H: 17 inches overall (glass top 1 inch)

Dimensions of base
W 37 inches
D: 15 inches
H: 16 inches

Condition: Excellent

SOLD

ref: coffeetable525

Paul Evans Sculpted Bronze Wall Unit 1974 (Signed and Dated) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Wall unit with 2 pilasters in sculpted bronze resin and smoked glass shelves by Paul Evans, American 1974 (signed "PE 74"). This piece was created from a mixture of epoxy resin and sand applied to a plywood base and sculpted into various swirls, drips and other patterns. Once hardened, the piece was sandblasted, sprayed with an atomized bronze finish, varnished, blown with a torch to provide a smoky look, polished, and then varnished again. The resulting work has a metallic sheen but is lightweight compared with something made of cast bronze. A rare and iconic Paul Evans design.

W: 48 inches
D: 19.5 inches
H: 78.5 inches

Condition: Excellent

SOLD

ref: wallunit18F

Paul Evans Faceted Burl & Brass Credenza 1965 - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Credenza model PE-366, faceted in walnut burl and brass with brown fiberglass top, by Paul Evans for Directional Furniture, American 1965.

Reference:
Paul Evans, Crossing Boundaries and Crafting Modernism by Constance Kimmerle, Arnoldsche Art Publishers, 2014, a wall mounted version of this cabinet is shown on pages 188 and 189.

W: 7 feet
D: 24 inches
H: 32.5 inches

SOLD

Condition: Excellent - a few light scratches and signs of wear. It’s in great condition for its age.

ref: credenza61

Paul Evans Important Sculpted Bronze Wall Cabinet 1969 (Signed) - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Rare and important large sculpted bronze wall cabinet with enameled steel elements and 3 cleft slate top pieces by Paul Evans Studio for Direction Furniture, 1969 (signed “PE 69” on bottom). The gray steel elements set into the bronze resin are an incredible color combination. Bronze resin was created from a mixture of epoxy resin and sand applied to a plywood base and sculpted into various swirls, drips and other patterns. Once hardened, the piece was sandblasted, sprayed with an atomized bronze finish, varnished, blown with a torch to provide a smoky look, polished, and then varnished again. The resulting work has a metallic sheen but is lightweight compared with something made of cast bronze. (Photo shows wall cabinet with matching mirror, also available)

Reference:
Paul Evans: Designer & Sculptor by Jeffrey Head and published in 2012, this model is shown on page 52.

W: 96 inches
D: 20 inches
H: 23 inches

Condition: Excellent

SOLD

ref: cabinet59

Paul Evans Important "Sculpture Top Coffee Table" Signed and Dated 1973 - SOLD

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

Important and rare “Sculpture Top Coffee Table” in welded and patinated steel, color pigments, 24 karat gold leaf with glass top by Paul Evans, American 1973  (signed “Paul Evans 73’ on side).  This was custom made to be a coffee table—it is extremely rare.  Most of these welded panels were designed for cabinets or wall hanging flat sculpture panels. An extraordinary example of Paul Evans’ artistic genius.

Documentation:
Paul Evans, Crossing Boundaries and Crafting Modernism by Constance Kimmerle, Arnoldsche Art Publishers, 2014, similar examples are shown on pages 160 and 161.

Base Dimensions:
W: 42 inches
D: 22 inches
H: 16 inches
Glass top currently fits top however a larger pieces of glass can be made for larger specs.

Condition: Excellent

SOLD

ref: coffeetable439